Skip to main content

HC Series 18" Subwoofers

$609.95
(No reviews yet) Write a Review
SKU:
SW-HC-18
Weight:
60.00 LBS
Adding to cart… The item has been added

HC Series

 

The HC Series signals a return to traditional ferrite motors. The HC Series is the latest in the progression of Fi subwoofers geared towards thundering daily drivers. Utilizing a favorite 3 stack ferrite magnet design using US steel cut on our water jet and finish machined on our CNCs, there is plenty of motor force in the FEA derived design for both daily and SPL use. Utilizing a solid pole and staged aluminum cooling helps keeps thermal temperatures under control. A classic 3 stack of ferrite magnets provide the Gauss while 4 Fi designed 10″ heavy progressive spiders keep things under mechanical control. Utilizing a special 144 tinsel count leadwire that is double sewn to the spider pack, there are no losses in power transfer to the coil (available in either standard stitched with terminals or the hybrid stitched with bolted termination.

The HC brings back an updated favorite with the performance you have come to expect from our classic ferrite designs.

 

centered image

Above is the technical overview showing 3 stages of cooling and inductance mitigation

Features

Dual 1 and Dual 2 Ohm
Extra heavy aluminum basket
Wrap around gasket
Kraft pulp fiber reinforced cone
Dual layer wide foam surround
Standard heavy duty stitched hybrid lead or push/hybrid termination
144 tinsel count leads
FEA optimized motor design
High Flux density design
3” diameter 4 layer coil
Triple stack magnets
Carbon cap standard
Water jet and machined in house from US steel
Four progressive spiders
Staged Aluminum Cooling
6″ Gloss Carbon dustcap

 

THIELE-SMALL PARAMETERS

  HC-12 HC-15 HC-18
Coils DUAL 1 | DUAL 2 DUAL 1 | DUAL 2 DUAL 1 | DUAL 2
Fs 33.9Hz | 33.9Hz 32.8 Hz | 32.7 Hz 32.4 Hz | 32.3 Hz
Re 0.9 | 1.8 0.9 | 1.8 0.9 | 1.8
Qms 6.15 | 6.11 6.61 | 6.52 7.71 | 7.52
Qes .26 | .27 .30 | .31 .36 | .38
Qts .25 | .26 .29 | .30 .34 | .35
Mms 279g | 282g 326g | 331g 393g | 399g
Cms 0.833M/N | 0.831/N 0.718M/N | 0.72M/N 0.612M/N | 0.604M/N
Sd 480cm^2 | 480cm^2 810cm^2 | 810cm^2 1210cm^2 | 1210cm^2
Vas 24.9l | 24.8 l 28.1 l | 28.1 l 126.3 l | 125.2 l
Spl 87.6dB 1W/1m | 87.5dB 1W/1m 90.8dB 1W/1m | 90.7dB 1W/1m 92.6dB 1W/1m | 92.4dB 1W/1m
Bl 20.0 N/A | 28.2 N/A 20.0 N/A | 28.2 N/A 20.0 N/A | 28.2 N/A
Xmax 34mm (One Way) 34mm (One Way) 34mm (One Way)
Rms 2500W 2500W 2500W
 
 

Technical Specifications

  HC-12 HC-15 HC-18
Overall Diameter 12.500″ 15.625″ 18.500”
Cutout Diameter 11.125″ 14.125” 16.750”
Mounting Depth 7.250″ 8.750″ 9.50”
DriverDisplacement 0.08cuft 0.09cuft 0.10cuft
Sealed Box .5-1.5 cuft 1.5-2.5 cuft 2.5-4 cuft
Ported Box 1.8-2.5 cuft @ 33Hz 3-5 cuft @ 33Hz 5-7cuft @ 33Hz